How to adjust the four-eye button mode of the stapling machine
News
Release time:
2023-08-04 13:47
Summary:
First, four eyes buckle mode introduction
Four-eye buckle refers to the stapling machine in the stapling need to use two heads at the same time to complete the binding mode. In this mode, can improve the efficiency and reliability of the binding, suitable for some of the binding precision and efficiency of the higher requirements of the occasion.
Second, debugging steps
1. First of all, open the power supply of the stapling machine, and preheat the machine to a suitable temperature.
2. The documents to be stapled into the stapling machine, and select the four-eye buckle mode.
3. In the four-eye buckle mode, you need to carry out debugging between the head to ensure that the staple head works properly. The specific operation steps are as follows:
(1) Press the staple head gently with your hand and observe whether the head pops up automatically;
(2) Press the other head by hand and observe whether the head pops up automatically;
(3) If the head appears to be stuck or does not pop up, debugging and maintenance are required.
4. When stapling in four-eye buckle mode, you need to accurately place the document into the stapling machine and make each of the two heads snap to one side. During the stapling process, it is necessary to pay attention to the working condition of the head, as well as whether the position and angle of the two heads are correct.
5. After completing the four-eye buckle mode of binding, you need to check to ensure that the binding effect meets the requirements.
Other Information